Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment post, place and align the screw hole on the media-card reader board with the screw hole on the display-assembly
base.
2. Replace the screw (M3x5) that secures the media-card reader board to the display-assembly base.
3. Place the media-card reader shield on the media-card board and align the screw hole on the media-card reader shield with the screw
hole on the display-assembly base.
4. Replace the screw (M3x5) that secures the media-card reader shield to the display-assembly base.
5. Route and adhere the media-card reader cable to the display-assembly base.
6. Connect the media-card reader cable to the system board.
Post-requisites
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
42
Replacing the media-card reader
Replacing the media-card reader
computer. After working inside your computer, follow the instructions in
shield.
22
After
Hide quick links:
Advertisement
Table of Contents
