Replacing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the tabs on the media-card reader into the slots on the top panel.
2
Replace the screws that secure the media-card reader to the front panel.
3
Connect the media-card reader cable to the media-card reader.
Post-requisites
1
Replace the
top
2
Replace the
front
3
Replace the
computer
computer. After working inside your computer, follow
After working inside your
cover.
bezel.
cover.
computer. For more safety best
www.dell.com/
Before
73