Replacing the Active-Venting Assembly
1.
Follow the instructions in "Before You Begin" on page
2.
Place the active-venting assembly on the top of the chassis.
3.
Connect the active-venting assembly cables to the connectors on the
master I/O board.
4.
Replace the three screws that secure the active-venting assembly to the
chassis.
5.
Align the top panel with the slots in the chassis and replace the two screws
that secure the top panel to the chassis.
6.
Replace the right top-panel.
7.
Lay the chassis on its side.
8.
Replace the ten screws that secure the active-venting assembly to the top
of the chassis.
9.
Replace the top lighting-board (see "Replacing the Top Lighting-Board" on
page 76).
10.
Replace the screw that secures the right top-panel to the chassis.
6.
11.
Replace the drive-bay shroud (see "Replacing the Drive-Bay Shroud" on
page 19).
12.
Close the PCI shroud (see "Closing the PCI Shroud" on page
13.
Replace the left side-panel (see "Replacing the Left Side-Panel" on page
14.
Connect your computer and devices to electrical outlets and then turn
them on.
CHAPTER 17: ACTIVE-VENTING ASSEMBLY
18).
11).
087
/
087