Replacing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Connect the audio cable to the media card.
2
Connect the media-card reader cable to the media-card.
3
Align the media-card reader to the slot on the middle frame.
4
Align the screw hole on the media-card reader shield to the screw hole on the
middle frame.
5
Replace the two screws (M2X3) that secure the media-card reader shield to the
middle frame.
Post-requisites
1
Replace the speakers.
2
Replace the
inner
3
Replace the stand.
4
Replace the
back
5
Replace the
USB dongle-bay
108
computer. After working inside your computer, follow
After working inside your
frame.
cover.
cover.
computer. For more safety best
www.dell.com/
Before