Cisco Mesh Access Points Deployment Manual page 37

Mesh Network Components
2 If all LEDs are off, the access point has no power.
3 When the access point power supply is initially turned on, all LEDs are amber.
Serial Backhaul Access Point Guidelines for the Rest of the World (ROW)
In the 7.0 release, new 1524 SKUs are released, with both 802.11a radio units supporting the entire 5-GHz
band from 4.9 GHz to 5.8 GHz. This release also opens the 5-GHz band for the -A domain as well on the
existing hardware. The radios can also operate in UNII-2 (5.25 to 5.35 GHz), UNII-2 plus (5.47 to 5.725
GHz), and the upper ISM (5.725 to 5.850 GHz) bands.
The public safety band (4.94 to 4.99 GHz) is not supported for backhaul and for client access.
For information about the channels and maximum power levels of the AP1500 supported within the world's
regulatory domains, see the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access
Points manual at:
• AP1520:
chp.html
• AP1550:
1550pwr_chn.pdf
Table 5: Channels Supported Per Regulatory Domain, on page 21
supported in each domain. In addition to 5 channels in the upper ISM band, there are 4 channels in the UNII-2
band and 11 channels in the UNII-2 Plus band. For outdoor APs, there are 5 channels in the upper ISM band,
3 channels in the UNII-2 band, and 8 channels in the UNII-2 Plus band.
Table 5: Channels Supported Per Regulatory Domain
Channel ID
4940-5100 MHz
184
188
22/192
26/196
8
12
5250-5350 MHz
52
56
OL-27593-01
http://www.cisco.com/en/US/docs/wireless/access_point/channels/lwapp/reference/guide/1520_
http://www.cisco.com/en/US/docs/wireless/access_point/channels/lwapp/reference/guide/
Frequency Regulatory Domains
(MHz)
-A -C
4920
4949
4960
4980
5040
5060
5260
5280 DFS
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
Cisco Outdoor Mesh Access Points
provides a complete overview of channels
-E -K -M -N
DFS
-P -S -T
Yes
Yes
Yes
Yes
Yes
Yes
21