Adding Campus Maps; Adding Outdoor Areas - Cisco Mesh Access Points Deployment Manual

Adding Campus Maps

Detailed steps for adding these maps and components are noted below.
Adding Campus Maps
To add a single campus map to the Cisco Prime Infrastructure database, follow these steps:
Step 1 Save the map in .PNG, .JPG, .JPEG, or .GIF format.
The map can be any size because the Prime Infrastructure automatically resizes the map to fit its working
Note
areas.
Step 2 Browse to and import the map from anywhere in your file system.
Step 3 Choose Monitor > Maps to display the Maps page.
Step 4 From the Select a command drop-down list, choose New Campus and click GO.
Step 5
On the Maps > New Campus page, enter the campus name and campus contact name.
Step 6 Browse to and choose the image filename containing the map of the campus and click Open.
Step 7 Select the Maintain Aspect Ratio check box to prevent length and width distortion when the Prime Infrastructure resizes
the map.
Step 8 Enter the horizontal and vertical span of the map in feet.
The horizontal and vertical span should be larger than any building or floor plan to be added to the campus.
Note
Step 9 Click OK to add this campus map to the Prime Infrastructure database. The Prime Infrastructure displays the Maps page,
which lists maps in the database, map types, and campus status.

Adding Outdoor Areas

To add an outdoor area to a campus map, follow these steps:
You can add outdoor areas to a campus map in the Cisco Prime Infrastructure database regardless of
Note
whether you outdoor area maps are in the database.
Step 1
If you want to add a map of the outdoor area to the database, save the map in .PNG, .JPG, .JPEG, or .GIF format. Then
browse to and import the map from anywhere in your file system.
You do not need a map to add an outdoor area. You can simply define the dimensions of the area to add it to
Note
the database. The map can be any size because Cisco Prime Infrastructure automatically resizes the map to fit
the workspace.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
228
Managing Mesh Access Points with Cisco Prime Infrastructure
OL-27593-01