Cisco Mesh Access Points Deployment Manual page 142

Configuring Local Mesh Parameters
The syntax is as follows:
(controller) >
• show mesh neigh summary—Displays the link rate summary including the current rate being used in
backhaul
Example:
(controller) >
AP Name/Radio
--------------- --------
00:0B:85:5C:B9:20 0
00:0B:85:5F:FF:60 0
00:0B:85:62:1E:00 165
OO:0B:85:70:8C:A0 0
HPMAP1
HJMAP2
Backhaul capacity and throughput depends upon the type of the AP, that is, if it is 802.11a/n or only 802.11a,
number of backhaul radios it has, and so on.
In AP1524 SB, Slot 2 in the 5-GHz radio in the RAP is used to extend the backhaul in the downlink direction,
whereas Slot 2 in the 5-GHz radio in the MAP is used for backhaul in the uplink. We recommend using a
directional antenna with the Slot 2 radio. MAPs extend Slot 1 radio in the downlink direction with Omni or
directional antenna also providing client access. Client access can be provided on the Slot 2 radio from the
7.0 release onwards.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
126
Connecting the Cisco 1500 Series Mesh Access Points to the Network
show ap bhrate ap-name
show mesh neigh summary HPRAP1
Channel Rate Link-Snr
-------- -------
auto
auto
auto
auto
165 54
0 auto
Flags State
----- -----
4 0x10e8fcb8 BEACON
4 0x10e8fcb8 BEACON DEFAULT
4 0x10e8fcb8 BEACON
1 0x10e8fcb8 BEACON
40 0x36 CHILD BEACON
4 0x10e8fcb8 BEACON
OL-27593-01