Cisco Mesh Access Points Deployment Manual page 175

Connecting the Cisco 1500 Series Mesh Access Points to the Network
Workgroup Bridge Interoperability with Mesh Infrastructure
• A WGB cannot associate with mesh access points if the WLAN is configured with WPA1 (TKIP)
+WPA2 (AES), and the corresponding WGB interface is configured with only one of these encryptions
(either WPA1 or WPA2):
Figure 65: WPA Security Settings for a WGB
Figure 66: WPA-2 Security Settings for a WGB
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 159