Managing Mesh Access Points With Cisco Prime Infrastructure; Adding Campus Maps, Outdoor Areas, And Buildings With Cisco Prime Infrastructure - Cisco Mesh Access Points Deployment Manual

Managing Mesh Access Points with Cisco Prime
Infrastructure
This chapter describes how to manage mesh access points with Cisco Prime Infrastructure.
To configure and monitor mesh networks from Cisco Prime Infrastructure, you must first import campus
and outdoor maps into the Prime Infrastructure and add buildings. Thereafter, you can add mesh access
points to the map and configure and monitor mesh access points from the Prime Infrastructure.
This chapter contains the following sections:
•
•
•
•
•
•
•
Adding Campus Maps, Outdoor Areas, and Buildings with Cisco
Prime Infrastructure
For mesh networks, maps and items on those maps (buildings and mesh access points) are added to Cisco
Prime Infrastructure in the following order:
Step 1
Add a campus map.
Step 2 Add an outdoor area map.
Step 3 Add buildings.
Step 4 Add mesh access points.
OL-27593-01
Adding Campus Maps, Outdoor Areas, and Buildings with Cisco Prime Infrastructure, page 227
Adding Mesh Access Points to Maps with Cisco Prime Infrastructure, page 230
Monitoring Mesh Access Points Using Google Earth, page 232
Adding Indoor Mesh Access Points to Cisco Prime Infrastructure, page 236
Managing Mesh Access Points with Cisco Prime Infrastructure, page 237
Monitoring Workgroup Bridges, page 250
Viewing AP Last Reboot Reason, page 257
C H A P T E R
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
8
227