Cisco Mesh Access Points Deployment Manual page 176

Workgroup Bridge Interoperability with Mesh Infrastructure
To view the status of a WGB client, follow these steps:
Step 1 Choose Monitor > Clients.
Step 2 On the client summary page, click on the MAC address of the client or search for the client using its MAC address.
Step 3 In the page that appears, note that the client type is identified as a WGB (far right).
Figure 67: Clients are Identified as a WGB
Step 4 Click on the MAC address of the client to view configuration details:
• For a wireless client, the page seen in
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
160
Client), on page 161 appears.
Connecting the Cisco 1500 Series Mesh Access Points to the Network
Figure 68: Monitor > Clients > Detail Page (Wireless WGB
OL-27593-01