Viewing Global Mesh Parameter Settings - Cisco Mesh Access Points Deployment Manual

Viewing Global Mesh Parameter Settings

• show mesh astools stats [Cisco_AP]—Displays anti-stranding statistics for all outdoor mesh access
• show advanced backup-controller—Displays configured primary and secondary backup controllers.
• show advanced timer—Displays settings for system timers.
• show ap slots—Displays slot information for mesh access points.
Viewing Global Mesh Parameter Settings
Use this command to obtain information on global mesh settings:
• show mesh config—Displays global mesh configuration settings.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
196
Tertiary Cisco Switch IP Address................. 1.1.1.4
points or a specific mesh access point.
show mesh astools stats
(Cisco Controller) >
Total No of Aps stranded : 0
> (Cisco Controller) > show mesh astools stats sb_map1
Total No of Aps stranded : 0
show advanced backup-controller
(Cisco Controller) >
AP primary Backup Controller .................... controller1 10.10.10.10
AP secondary Backup Controller ............... 0.0.0.0
show advanced timer
(Cisco Controller) >
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1300
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Primary Discovery Timeout (seconds)........... 120
show ap slots
(Cisco Controller) >
Number of APs.................................... 3
AP Name Slots AP Model
--------------------------------
R1 2 LAP1520
H1 3 AIR-LAP1521AG-A-K9 802.11BG 802.11A
H2 4 AIR-LAP1521AG-A-K9 802.11BG 802.11A
show mesh config
(Cisco Controller) >
Mesh Range....................................... 12000
Backhaul with client access status............... disabled
Background Scanning State........................ enabled
Mesh Security
Security Mode................................. EAP
External-Auth................................. disabled
Use MAC Filter in External AAA server......... disabled
Force External Authentication................. disabled
Mesh Alarm Criteria
Max Hop Count................................. 4
Recommended Max Children for MAP.............. 10
Recommended Max Children for RAP.............. 20
Low Link SNR.................................. 12
High Link SNR................................. 60
Max Association Number........................ 10
Slot0 Slot1 Slot2
------ ------- ------
802.11A 802.11BG
802.11A
802.11A 802.11BG
Checking the Health of the Network
Slot3
------
OL-27593-01