Configuring A Locally Significant Certificate (Cli) - Cisco Mesh Access Points Deployment Manual

Connecting the Cisco 1500 Series Mesh Access Points to the Network

Configuring a Locally Significant Certificate (CLI)

To configure a locally significant certificate (LSC), follow these steps:
Step 1
Enable LSC and provision the LSC CA certificate in the controller.
Step 2 Enter the following command:
config local-auth eap-profile cert-issuer vendor prfMaP1500LlEAuth93
Step 3 Turn on the feature by entering the following command:
config mesh lsc {enable | disable}
OL-27593-01
Locally Significant Certificates for Mesh APs
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
187