Kyocera KM-2030 Instruction Handbook Manual page 65

5
Close the left cover and multi-bypass.
IMPORTANT
• If the optional duplex unit is installed, be sure to close the left cover
before closing the duplex unit.
3 3 3 Misfeed in DF <optional> (JAM 70 ~ 76) 3 3
If the message "Misfeed in feeder. Remove original(s)." appears with
the misfeed location indicator shown in the illustration, a misfeed has
occurred in the DF. Remove the misfed original using the procedure
given below.
Remove all the originals from the original table.
1
Open the DF original cover.
2
3
Remove the misfed original.
4 Close the DF original cover.
Set the misfed original together with those removed back
onto the original table and resume the copying operation.
CHAPTER 8 WHEN A PROBLEM OCCURS
4 Misfeed in duplex unit <optional> (JAM 60, 61) 4 4 4 4
If the message "Paper misfeed. Open duplex unit." appears with the
misfeed location indicator shown in the illustration, a misfeed has
occurred in the duplex unit. Remove the misfed paper using the
procedure given below.
1
Hold the duplex unit open/close lever (1 in the illustration)
and open the duplex unit.
2
Hold the switchback guide handle (2 in the illustration) and
open the switchback guide, and then remove the misfed
paper.
3
Close the switchback guide first and then close the duplex
unit.
5 5 5 5 5 Misfeed in finisher <option> (JAM 80 ~ 83)
If the message "Remove paper from finisher." appears with the
misfeed location indicator shown in the illustration, a misfeed has
occurred in the finisher.
For details, see the finisher's instruction handbook.
8-6