Kyocera KM-2030 Instruction Handbook Manual page 42

10
Make sure that "End" has been selected and press the enter
key.
The message display will return to the screen in step 4.
11 Press the cursor up key to select "End", and press the enter
key.
The message display will return to the screen in step 2.
12
Press the cursor up key to select "End", and press the enter
key.
The message display will return to the "Ready to copy."
screen.
Clearing copy counts
1 Display the copy management selection screen. (See page
6-3.)
2 Press the cursor down key to select "Management Setting".
3
Press the enter key.
4
Press the cursor down key to select "Count delete".
5 Press the enter key.
CHAPTER 6 COPIER MANAGEMENT
6
A message will appear asking you to confirm whether to
clear all copy counts or not. To clear the copy counts, press
the cursor up key to select "Yes" and press the enter key. To
cancel the command, make sure that "No" has been selected
and press the enter key. The message display will return to
the screen in step 4.
7 Press the cursor up key to select "End", and press the enter
key.
The message display will return to the screen in step 2.
8 Press the cursor up key to select "End", and press the enter
key.
The message display will return to the "Ready to copy."
screen.
Viewing copy counts
1 Display the copy management selection screen. (See page
6-3.)
2 Press the cursor down key to select "Reference".
3
Press the enter key.
4
Press the cursor down key to view the number of copies in
all the departments and select "All Department total". To view
the number of copies by one department each, select
"Department".
6-6