Signal Status Menu; Tv Service; Video Status Menu - TANDBERG TT-1222 Reference Manual

ASI Input
Table C.45: Input Status Menu, ASI Input
Menu title: STAT:INPUT
Lock:
QPSK Input
Table C.46: Input Status Menu, QPSK Input
Menu title: STATUS: INPUT
Lock:
BER(PostV):
Inner Code:
Spec Inv:
Lock freq:
C.6.5

Signal Status Menu

The signal status menu provides information on the incoming transport
stream.
Table C.47: Signal Status Menu
Menu title: STAT:SIGNAL
Pkt OK:
Bit-rate:
TV Service >
Audio 2 Service >
C.6.6

TV Service

Table C.48: TV Service Status Menu
Menu title: STAT:TV SERVICE
Video >
Audio 1 >
VBI >
Data >
C.6.7

Video Status Menu

The video signal status submenu contains information about the currently
decoded MPEG-2 video.
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Description
Indicate whether the input is locked.
Options are: Locked and Not locked
Description
Indicates whether the demodulator is locked.
Options are: Locked and Not locked
Provides the post Viterbi BER measurement, in logarithmic
annotation.
Displays the inner code.
Displays the Spec Inv.
Provides the frequency at which the demodulator has locked in
Gigahertz (GHz).
Description
Counts the number of seconds since the last sync break.
Reports the current total bit-rate of the incoming transport stream
in Mbit/s.
Enters the TV Service status submenu
Enters the Audio 2 Service status submenu
Description
Enters the video status submenu.
Enters the Audio1 status submenu.
Enters the VBI status submenu.
Enters the Data status submenu.
Front Panel LCD Menus
Section
----
Section
----
----
----
----
----
Section
----
----
C.6.6
C.6.8
Section
C.6.7
C.6.8
C.6.9
C.6.10
Page C-31