Audio Status Menu - TANDBERG TT-1222 Reference Manual

Front Panel LCD Menus
Table C.49: Video Status Menu
Menu title: STAT: VIDEO
Hsize:
Vsize:
Eff. Rate:
Format:
Pict. Rate:
VPTS Use %:
VPTS Err ms:
C.6.8

Audio Status Menu

These status submenus contain information about the audio format and
quality of the currently decoded audio stream for the corresponding audio
channel.
Table C.50: Audio 1 and 2 Status Menus
Menu title: STAT:AUDIO
Coding:
Mode:
Rate (kbps):
Smpl:
Prot:
Page C-32
Description
Display the horizontal resolution of the video.
Display the Vertical resolution of the video.
Shows the effective bit-rate of the video component in 188 byte
packet size.
Shows the aspect ratio (4:3 or 16:9) of the video.
Displays the number of pictures per second being displayed,
usually 25 Hz or 30 Hz.
Shows the usage, in percent, of the video decoding buffer.
Shows the difference (in ms) between the actual decoding of the
component, and the ideal decoding time according to PTS.
Description
Display the audio coding model, as layer I, layer II.
Shows the modulation mode reported used in the encoder.
Mono, Dual mono, Stereo, Joint Stereo is displayed depending on the
input.
Shows the bit-rate, in kilobits per second, that the audio was coded.
Shows the sampling rate, usually 32, 44.1 or 48 kHz.
Informs if protection bits are present for the currently decoded audio
stream.
Reference Guide: TT1222 4:2:0 Professional Receiver
Section
----
----
----
----
----
----
----
Section
----
----
----
----
----
ST.RE.TT1222.2