Ls Output Menu; Asi Output Menu - TANDBERG TT-1222 Reference Manual

C.5.23 LS Output Menu
The LS data output menu controls the output format and buffering of the
low speed data.
Table C.31: LS Data Output Setup Menu
Menu title: SET:RS232 LS O/P
O/P Format:
Buffering:
C.5.24 ASI Output Menu
Table C.32: ASI Output Setup Menu
Menu title: SET:ASI OUT
Output:
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Description
Sets the output format of the low speed data port.
Bin - Provides a binary output.
Hex - Provides a hexadecimal output with the most significant
nibble first
Default = Bin.
Set the buffering mechanism used for the low speed data port.
Flow - Transmits the selected PID directly without buffering.
Burst - This mode can be used for analysing the input sequence
of a PID that has higher transfer rate than the UART can handle
(max 115.2k). The buffer will fill up and dump the contents out on
the serial line. The buffer size is in both cases 16 kbit/s.
Default = Flow.
Description
This item selects the preferred ASI output.
Scramble – If the input is scrambled, the output will also be
scrambled.
Descramble –The receiver will output a descrambled service
when possible.
Default = Scrambled.
NOTES...
1. The receiver must be set up to
descramble a scrambled service.
2. The output will always be 188 packet
size.
Front Panel LCD Menus
Section
----
----
Section
----
Page C-25