Audio 2 Service Id; Video Setup - TANDBERG TT-1222 Reference Manual

Front Panel LCD Menus
Table C.8: Audio2 Service Menu
Menu title: SET:AUD2 SERVICE
Service ID >
Track Audio 1:
Aud2 Type
Aud2 Lang:
C.5.5

Audio 2 Service ID

Table C.9: Audio 2 Service ID Menu
Menu title: SET:AUD2 SERVICEID
Service ID:
C.5.6

Video Setup

Table C.10: Video Setup Menu
Menu title: SET:VIDEO SETUP
625 Setup >
525 Setup >
Default o/p >
Page C-10
*
:
Description
Display or change the service ID for the decoded service.
Audio 2 can be set to track Audio 1.
Off: Audio 2 can be set to decode a different audio service.
On: Audio 2 will be the same audio service as Audio 1.
NOTE...
When this is selected, the Audio 2 service ID
menu is frozen and can not be used. It will
show the Audio 1 service ID.
Default = On.
Defines the preferred audio format.
Musicam – The receiver will decode the Musicam packets
AC-3 - The receiver will decode the AC-3 packets (if this
software option is enabled on the receiver)
Default = Musicam.
*
NOTE...
This option is only available if the AC-3
software option has been enabled on the
receiver.
Allows the entry of the three character ISO language code (e.g.
eng or nor). This code selects the correct audio PID for the
selected audio service.
If the selected code is not present in the audio stream, the first
audio stream in the PMT table will be used.
Default = eng
Description
The PID of the required audio service can be entered directly.
Alternatively, the user can scroll down and select from a list of
recognised services.
Description
Enters the 625 Video Setup submenu
Enters the 525 Video Setup submenu
Enters the Default Output menu
Reference Guide: TT1222 4:2:0 Professional Receiver
Section
C.5.5
----
----
----
Section
----
Section
C.5.7
0
C.5.9
ST.RE.TT1222.2