Gpo Status Menu; Input Status Menu - TANDBERG TT-1222 Reference Manual

Front Panel LCD Menus
Menu title: STAT:ALARM
DVB Subt
Audio1
Audio2
Data
Config
For information regarding the alarms and their individual interpretations,
refer to Annex D, Alarm Categories and Conditions.
C.6.3

GPO Status Menu

This menu shows the current state of all the GPOs.
Table C.44: GPO Status Menus
Menu title: STAT:GPO
GPO 1:
GPO 2:
GPO 3:
GPO 4:
GPO 5:
Further menus from this one indicate which events are triggering the
GPOs.
It will show one of the following:
No Setup –
No Trigger – The GPO is set up to trigger on one or more events but
<a list of one or more triggers> - This is the list of events which
are currently triggering the GPO.
C.6.4

Input Status Menu

The input status menu provides information regarding the quality of the
input signal. The information provided will depend on what input module is
fitted inside the receiver.
Page C-30
Description
Enters the DVB Subtitle alarm status submenu
Enters the Audio 1 alarm status submenu
Enters the Audio 2 alarm status submenu
Enters the Data alarm status submenu
Enters the Config alarm status submenu
Description
Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO.
Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO.
Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO.
Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO.
Status can be high or low.
High – One or more events are triggering the GPO.
Low – No events are triggering the GPO.
This means the GPO is not set up to trigger on any
events.
the events are not occurring.
Reference Guide: TT1222 4:2:0 Professional Receiver
Section
Annex D
Annex D
Annex D
Annex D
Annex D
Section
----
----
----
----
----
ST.RE.TT1222.2