Service Configuration (Menu #3); Selecting A Service; Setting Up A Service; Setting Up The Power-Up Service - TANDBERG TT1260 Instruction Manual

3.6

Service Configuration (Menu #3)

3.6.1

Selecting a Service

Setting Up a Service

Each transport stream may contain many Services. Menu #3 allows a
Service to be chosen as current and the profile of its components to be
specified.
Table 3.7: Selecting a Service
Step
1
2

Setting Up the Power-up Service

Menu #3 allows a Service to be chosen as the Power-up default.
Table 3.8: Selecting a Power-up Service
Step
1
2
3.6.2

Selecting the Video Component

Table 3.9: Selecting the Video Component
Step
1
2
3
4
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
Action
Go to Menu #3.1 and select the required
Service.
The EDIT mode cannot be entered unless
there are available Services.
Press SAVE.
Action
Go to Menu #3.1 and select the required
Service (or last valid service).
Press SAVE.
Action
Go to Menu #3.4 and select the PID.
Scroll down to Menu #3.1.4 and edit the 525
line video output coding (NTSC-M, PAL-M,
NTSC-M NP) and the 625 line video output
coding (PAL-I, PAL-N, PAL-N CMB). Press
SAVE.
Scroll down to Menu #3.1.5 and edit the
parameter for setting the default video line
standard (525 or 625) and the parameter for
setting the response to loss of video
(FREEZE FRAME, BLACK FRAME, NO
SYNCS). Press SAVE. Perform a system
restart (see Section 3.9 Restarting the Unit).
Scroll down to Menu #3.1.6 and edit the
video test pattern to be displayed. Press
SAVE.
Operating the Equipment Locally
Result
This page shows the total number of Services available in the
incoming transport stream. Use EDIT and the arrow pushbuttons to
select the required Service.
This stores the Service as the Current Service.
Result
This sets the service to which the TT1260 configures on power-up.
This stores the service as the power-up service.
Result
Gains access to the Video Component menu.
Edits the 525 line video output coding and the 625 line video output
coding.
Edits the parameter for setting the default video line standard and
the parameter for setting the response to loss of video.
Edits the video test pattern to be displayed.
Page 3-9