Preliminary Checks; Mechanical Inspection; Moving The Equipment Safely; Installing The Equipment - TANDBERG TT-1222 Reference Manual

Installing the Equipment

2.2

Preliminary Checks

2.2.1

Mechanical Inspection

Inspect the equipment for damage-in-transit. If in doubt, please contact
TANDBERG Television Customer Services (see Preliminary pages).
REMOVING THE COVERS OF THIS EQUIPMENT MAY INVALIDATE ANY WARRANTIES, CAUSE A
SAFETY HAZARD AND / OR AFFECT THE EMC PERFORMANCE. CHECK WITH TANDBERG
2.2.2

Moving the Equipment Safely

An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn. Do not move or carry the equipment whilst it
is still connected to the supply or other leads, is live, or is in operation.
2.3 Installing the Equipment
2.3.1

Fixing

The TT1222 is designed for fixed use only and has been shipped with fixing
brackets suitable for a standard 19-inch rack. When installed in a rack, it
should be secured by using the fixing brackets. In addition, support
shelves must be used to reduce the weight on the brackets. Ensure it is
firmly and safely located and it has an adequate free-flow of air.
A freestanding unit should be installed on a secure horizontal surface
where it is unlikely to be knocked or its connectors and leads disturbed.
2.3.2

Ventilation

Openings in the Covers

Openings in the cabinet are provided for ventilation. These ensure reliable
operation of the unit and protect it from overheating. These openings must
not be blocked or covered.
Figure 2.1: Openings in the Cabinet
Page 2-4
WARNING...
TELEVISION CUSTOMER SERVICES.
Do not place this product on an unstable cart, stand,
bracket, or table. The product may fall, causing serious
injury and serious damage to the product. Use only with a
cart, stand, bracket or table recommended by TANDBERG
Television.
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2