Audio Decoder; Analogue Audio Output; S/Pdif Audio Output - TANDBERG TT-1222 Reference Manual

B.4.7

Audio Decoder

Table B.8: Audio Decoder
Parameter
Supported formats:
Output format option:
B.4.8

Analogue Audio Output

Table B.9: Analogue Audio Output Specification
Parameter
Safety status:
Output connector:
Output format:
Minimum bit-rate:
Maximum bit-rate:
Sampling rates:
Nominal output level:
18 dB below clipping:
Adjustable:
Step size:
Output impedance:
Freq response:
Fs 44.1 / Fs 48 kHz:
Fs 32 kHz:
THD+N @ +9 dB:
IMD @ 9.95-10.05 kHz, 0 dB:
Inter channel phase:
Idle channel noise:
For detail of connector pin out, refer to Chapter 2, Installing the
Equipment.
B.4.9

S/PDIF Audio Output

Table B.10: S/PDIF Audio Output Specification
Parameter
Safety status:
Output connector:
Sampling rates:
Output format:
Levels:
For detail of connector pin out, refer to Chapter 2, Installing the
Equipment.
Reference Guide: TT1222 4:2:0 Professional Receiver
ST.RE.TT1222.2
Performance
MPEG-1 layer 1,
MPEG-1 layer 2 (MUSICAM)
Dolby AC-3 Downmix
Audio 1 and Audio 2:Balanced analogue and S/PDIF
Performance
SELV
9 pin D-sub (male)
Balanced
32 kbit/s
384 kbit/s
32, 44.1, 48 kHz
0 dBm in 600 Ω
-9 to +3 dB
0.1 dB
< 20 Ω
±0.5 dB (20 Hz – 20 kHz)
±0.5 dB (20 Hz – 14.5 kHz), +0.5 dB / -1.5 dB (14.5 – 20 kHz)
< 63 dB (20 Hz – 20 kHz)
< -50 dB
< 3°
< -74 dB
Performance
SELV
9 pin D-sub (male)
44.1, 48 kHz
IEC 60958
ANSI/SMPTE 276M-1995
Technical Specification
Page B-7