Cartridge Handling; Inserting Cartridges Into The Magazine; Loading A Cartridge Into The Drive - Tandberg Data SLR AUTOLOADER Service And Repair Manual

Compact tape cartridge loader

Hide thumbs Also See for SLR AUTOLOADER:

Table of Contents

Cartridge Handling

Insert cartridges so that access door is facing up and located at the magazine front.

After you insert your cartridges, position the magazine so that the cartridges face

forward and the handle is toward you. Make sure the cartridges latch.

The normal operations of the unit are controlled by storage management software

resident on the host computer. When you must load or unload a specific cartridge

using the control buttons on the front panel, do the following:

To load a cartridge:

1. Press the

button.

Load

The screen displays a cartridge slot number on line two and the barcode label

text for the cartridge on line three:

2. Select the slot number of your choice. The system ignores empty slots. Press the

▲ button to increment and the ▼ button to decrement.

3. Press the SELECT button.

The robot shuttle removes the cartridge from the selected magazine slot and

moves it to the drive.

Tandberg SLR Autoloader Service and Repair Manual

▲

CANCEL

SLOT 1

Label = XXX111

▼

SELECT

Table of Contents

Do you have a question about the SLR AUTOLOADER and is the answer not in the manual?