Table of Contents
Advertisement
Tandberg Data
The Robot Shuttle Assembly
Cleaning the Bar Code Reader
1. Press the Open Door button.
The robot shuttle moves over to operate the door latch, and the door swings
open.
Note: If the door does not open, refer to Appendix C – Emergency Magazine
Removal.
2. Turn off the power.
3. Pull out the magazine, and make sure that no cartridges are left in the robot
shuttle.
4. Facing the door panel, gently place the unit on its left side.
5. Remove four M3 button socket head screws from the underside of the painted
cover.
70
Chapter 7 – Parts Removal and Replacement
Tandberg SLR Autoloader Service and Repair Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the SLR AUTOLOADER and is the answer not in the manual?
Questions and answers