Table of Contents
Advertisement
Tape Cartridge Magazine
The 8-cartridge magazine is accessible through the front panel door. The rugged
polymer magazine fits into an alignment guide, which assures precise cartridge
positioning with respect to the loader robotics.
The only correct insertion orientation for the magazine is shown in the photographic
sequence on the next page.
As the magazine moves into its loader compartment, it should move inward until it
snaps into place. (The two chassis metal detents snap into the magazine slots in its
top surface). The magazine locks into position when you close the front door panel.
Note: The SLR Autoloader is shipped with a soft vinyl dust cover for use when the
magazine is not installed in the loader unit. The cover is contained in the
Accessories Kit box and can be easily slipped over the open end of the magazine.
The SLR Autoloader magazine is shown here:
Tandberg SLR Autoloader Service and Repair Manual
7
Advertisement
Table of Contents
