Low Voltage Power Supply; Removing The Low Voltage Power Supply - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Low voltage power supply

Warning
Switch off the power and disconnect the power cord.
1.
Remove the printer unit chassis as shown on page 100.
2. Disconnect CN1, CN2, CN3, CN5 and CN9 from the low voltage power
supply.
3. Disconnect the AC power switch wiring harness interconnect.
4.
Remove the eight screws securing the low voltage power supply to the
printer.
5.
Remove the low voltage power supply to remove.

Removing the low voltage power supply

Reverse these steps to install the low voltage power supply.
114 Phaser 2135 Color Printer
Remove
Screws
Low Voltage
Power Supply
0725-28