Paper-Size Sensing Board; Removing The Feed Roller And Nudger Roller - Xerox 2135DX - Phaser Color Laser Printer Service Manual

Paper-size sensing board

Warning Switch off the power and disconnect the power cord.
1. Remove paper tray 1.
2.
Reaching in through the cavity left by paper tray 1, disconnect the
ribbon cable attached to the paper size sensing board.
3. Again reaching in through the cavity left by paper tray 1, remove the
four screws securing the paper-size sensing board.
Remove
Screws
Paper Size Sensor Board

Removing the feed roller and nudger roller

Reverse these steps to install the paper-size sensing board.
0725-31
Service Guide 117