Front Panel Messages - Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual

Troubleshooting

Front Panel Messages

Your printer displays messages on the front panel when operator intervention is required.
The two-line display of the front panel provides information about the condition of the
printer and the suggested or required course of action.
There are two types of messages that require action:
Fault messages appear when the printer stops due to a malfunction, such as a paper
I
jam. Action must be taken to resolve the fault.
Attention messages do not stop the printer, but warn of action that should be taken to
I
avert a shutdown.
The table below lists fault and attention messages in alphabetical order, along with an
explanation and corrective action.
Front Panel Messages
Message
Check Tray
[Check Tray 1]
[Check Tray 2]
[Check Tray 3]
No Tray Present
Controller Fan Error U8
Power Off/On
Disk Read [Write] Error
Press Enter To Clear
82
Type Explanation/Corrective Action
Fault The indicated tray is not installed. Make sure
the tray is fully inserted.
Fault An error has been detected with the
controller cavity cooling fan. Turn off the
printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the
support links at
www.xerox.com/officeprinting/1235support.
Attention There was a hard disk read error that
prevented the data from being read. Press the
Enter button to clear the message. Turn off
the printer, wait 15 seconds, then turn on the
printer. If the problem persists, check the
support links at
www.xerox.com/officeprinting/1235support.
Phaser 1235 Network Color Printers