Making Adjustments; Black Density Adjustment; Color Density Adjustment - Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual

Maintaining the Printer

Making Adjustments

Use the following procedures to make adjustments to the color density and balance:

Black Density Adjustment

†
Press Item Up or Item Down until you see:
1
Color Adjust Menu
Black Density
2 Press Value Up or Value Down until you see:
Black Density =
New Value
Values are
-3K, -2K, -1K, 0, +1K, +2K, +3K
3 Press Enter. The Color Adjust Page prints and the front panel displays:
Color Adjust Menu
Black Density
4 Repeat Steps 2 and 3 above until you are satisfied with the results.
To exit this menu, scroll to Exit with the Item button and select YES with the Value button.

Color Density Adjustment

†
Press Item Up or Item Down until you see:
1
Color Adjust Menu
Color Density
2 Press Value Up or Value Down until you see:
Color Density =
New Value
Values are
-3CMY, -2CMY, -1CMY, 0, +1CMY, +2CMY, +3CMY
3 Press Enter. The Color Adjust Page prints and the front panel displays:
Color Adjust Menu
Color Density
4 Repeat Steps 2 and 3 above until you are satisfied with the results.
5 To exit this menu, scroll to Exit with the Item button and select YES with the Value button.
†
Note that the buttons have graphics and numbers only (no written labels) on the 220 V models
of the printer. Please see
76
Front Panel Layout
on page 39 for button numbers and graphics.
.
.
Phaser 1235 Network Color Printers