Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual page 112

Troubleshooting guide
Hide thumbs Also See for 1235/DX - Phaser Color Laser Printer:
Table of Contents

Advertisement

Troubleshooting
Printer Management Status Messages (cont'd.)
Message
Un-LED Bar Missing
[U18-Yellow LED Bar
Missing]
[U19-Magenta LED Bar
Missing]
[U20-Cyan LED Bar
Missing]
[U21-Black LED Bar
Missing]
Un-Drum Error
[U26-Yellow Drum Error]
[U27-Magenta Drum Error]
[U28-Cyan Drum Error]
[U29-Black Drum Error]
Wn-Toner Low
[W1-Yellow Toner Low]
[W2-Magenta Toner Low]
[W3-Cyan Toner Low]
[W4-Black Toner Low]
Un-Toner Missing
[U22-Yellow Toner
Missing]
[U23-Magenta Toner
Missing]
[U24-Cyan Toner Missing]
[U25-Black Toner
Missing]
W5-Transfer Belt Near End
Of Life
96
Type
Explanation/Corrective Action
Fault
The LED bar is either missing or requires reseating
to be recognized by the printer. Turn off the
printer, wait 15 seconds, then turn on the printer.
If the problem persists, check the support links at
www.xerox.com/officeprinting/1235support.
Fault
The imaging drum is either missing or requires
reseating to be recognized by the printer. Turn off
the printer, make sure the imaging drum is
properly installed and turn on the printer. If the
problem persists, install a new imaging drum. For
further assistance, visit the support links at
www.xerox.com/officeprinting/1235support.
Attention
The level of toner in the toner cartridge is low.
The toner cartridge should be replaced soon, as it
is near its end of life. Printing can continue until
the toner cartridge is empty; however, some
degradation of image quality may occur. The
message remains until interrupted by other
messages or until the toner cartridge is replaced.
Fault
The toner is either missing or requires reseating to
be recognized by the printer. Turn off the printer,
wait 15 seconds, then turn on the printer. If the
problem persists, check the support links at
www.xerox.com/officeprinting/1235support.
Attention
The transfer belt is near its end of life. Printing can
continue until the printer determines that the
transfer belt is at its end of life; however, some
degradation of image quality may occur. The
message remains until interrupted by other
messages or until the transfer belt is replaced.
Phaser 1235 Network Color Printers

Advertisement

Table of Contents
loading

This manual is also suitable for:

1235dt - phaser color solid ink printerPhaser 1235

Table of Contents