Booklet Creation - Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual

Printing

Booklet Creation

Prints your document in the form of a small book. You must have the optional duplex
module installed to use this feature.
It is available for any paper size that is supported for 2-sided (duplex) printing (see
I
Duplex (2-Sided Printing) on page 31).
Your booklet can have any number of page images and the driver prints it on
I
one-fourth that number of sheets of paper.
If the number of page images is an exact multiple of four, there will be no blank pages
I
in the final book. If the number of pages in the book is not in multiples of four, the last
page, last two pages, or last three pages may be blank.
The driver reduces each page image by fifty percent and prints two images on each
I
side of a sheet of paper. To create the booklet, fold the pages and staple them after
they print.
The 2-Sided option must be set to On to use this option.
I
On a folded sheet of paper with two page images, the horizontal distance from the
I
fold to the page image is called the gutter. The Gutter control allows you to set this
distance to zero, 50, 100, or 150 dots.
28 Phaser 1235 Network Color Printers