Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual page 77

Front Panel Menus, Items and Values (cont'd.)
Menu Description and Items
Ethernet HTTP Enable
(cont)
IPP Enable
IP Address
Res
IP Address
Sub Net Mask
Default
Gateway
Port Timeout
Speed
Advanced Features and Troubleshooting Manual
Enables or disables the Ethernet HTTP Server protocol. Available
values are:
On*
Off
Enables or disables the Ethernet IPP protocol. Available values are:
On*
Off
Sets the method used to assign the IP address, including Sub Net
Mask and Default Gateway. Available values are:
Static
BOOTP/RARP
DHCP*
Sets the 4 byte IP address. Available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
Note
See the section Setting Network Addressing on
page 48 for an explanation of how to set this item.
Sets the 4 byte Sub Net Mask address. Available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
See the section Setting Network Addressing on page 48 for an
explanation of how to set this item.
Sets the 4 byte Default Gateway address. Available values are:
xxx.xxx.xxx.xxx
(where xxx = 000 to 255)
Note
See the section Setting Network Addressing on
page 48 for an explanation of how to set this item.
Sets the time for determining when to terminate an incomplete
print job and poll the next port in the polling sequence. Available
values are:
5 - 300 seconds (60* seconds)
Sets the speed of the optional 100 Mbit Ethernet interface.
Available values are:
Auto*
10/HALF
10/FULL
100/HALF
100/FULL
HALF = half duplex
FULL = full duplex
Managing Printer Usage
61