Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual page 84

Managing Printer Usage
Front Panel Menus, Items and Values (cont'd.)
Menu Description and Items
Print
Allows you to generate printer reports:
Startup Page
Config Sheet
PCL Font List
PS Font List
PS Demo
Page
Menu Map
System Event
Log
Disk
Directory
Print
Quantity
Select Tray
Hex Mode
Restart
Printer
68
Prints the Startup Page.
Prints the configuration sheet showing the printer's current
information and menu settings.
Prints a complete list of all PCL fonts currently loaded.
Prints a complete list of all PostScript language fonts currently
loaded.
Prints a PostScript demonstration page that shows the printer
features.
Prints a page showing the configuration of the front panel Menu
tree.
Prints a list of the last 100 printer events (as shown in the
Service Menu - Show Event History
Prints a list of fonts and macros loaded on the hard drive.
Sets the number of times each printer report page is printed
(uncollated).
Note
This value is reset to 1 upon exiting the menu.
Selects the source tray from which the printer report is to be
printed (and appears only if the optional Tray 2/Tray 3 is
installed).
Enables or disables Hex dump mode, which prints the data stream
as Hex codes instead of interpreting it as print data. Available
values are:
Yes
No*
Note
The printer must be restarted (use either Restart
Printer or power the printer off and on) to exit Hex
mode.
Reboots the printer as if the power was switched on and off, but
bypasses the power on diagnostics.
section on page 67.
Phaser 1235 Network Color Printers