Front Panel Error Messages - Xerox 8200B - Phaser Color Solid Ink Printer Advanced Features And Troubleshooting Manual

Front panel error messages

When in a menu, the front panel returns to
The front panel menu times out and returns to
I
in the menu system in 2 minutes.
If you want to re-enter the menu system, highlight
I
Output tray full
Too much media is stacked in the output tray. Remove all printed pages from the
I
output tray.
Ink low - Add ink
One or more ink-loading bin is almost empty. Add more ink soon.
I
If needed, order additional Phaser ColorStix® 8200 Ink Sticks. See the web site:
I
www.xerox.com/officeprinting/8200supplies
Out of ink
One or more ink-loading bin is empty. Add more ink sticks to the bin that is empty.
I
A label above each bin indicates the color and color number of that bin. Because
I
the magenta, cyan, and black ink sticks are all dark, refer to its color number to
determine which bin to load the ink stick. Don't worry if the yellow ink sticks
have darker areas.
Use only Phaser ColorStix® 8200 Ink Sticks; the use of other ink may affect print
I
quality and reliability. Xerox warranties and service contracts do not cover
damage, malfunction, or degradation of performance caused by the use of
non-Xerox supplies or consumables or the use of Xerox supplies not specified for
use with this printer.
Each ink stick is uniquely shaped to fit into the correct ink-loading bin. Insert the
I
ink stick's narrow end first.
Ink sticks jammed
One or more ink sticks are stuck in the ink-loading bin. Open and close the top cover.
I
If the problem persists, move the ink sticks until there are no spaces between sticks of
I
the same color.
To prevent problems:
I
Do not use broken ink sticks.
I
Always install the ink stick's narrow end first.
I
Advanced Features and Troubleshooting Manual
Ready to Print
Ready to Print
and press the OK key.
Menus
Troubleshooting
if no activity occurs
49