Frame L/ Drive Unit - Brother HL 5030 - B/W Laser Printer Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.21 Frame L / Drive Unit
(1) Remove the main PCB sheet from the frame L.
(2) Remove the four bind B M4x12 Taptite screws.
(3) Remove the two bind B M3x10 Taptite screws, and then remove the frame L.
Main PCB
sheet
Taptite, bind B
M4x12
(4) Remove the back up plate ground spring. (HL-5030/5040 only)
Under bar
Taptite, bind B M3x10
Drive unit
Back up plate
ground spring
Frame L
Taptite, bind B M3x10
Fig. 4-94
Fig. 4-95
4-54
Under bar
Frame L