For Macintosh Users - Brother HL 5030 - B/W Laser Printer Service Manual

(3) Select the IP address of your printer and LPR, and then click the Next button.
(4) Click the Finish button.
For WindowsNT
®
For Windows
5. For Brother Peer-to-Peer network printer users (NetBIOS)
Configuring the NetBIOS port
(1) Select Brother Peer-to-Peer Network Printer, and then click the Next button.
(2) Select Search from a list of available printers. Click the Next button.
(3) Select the IP address or node name of your printer and NetBIOS, and then click the Next
button.
(4) Click the Finish button.
For WindowsNT
®
For Windows
3.3

For Macintosh Users

For USB interface cable users
Connect the printer to the Macintosh and install the BR-Script PPD File
®
<For Mac OS 8.6 to 9.2 Users (HL-5030/5040 Users)
(1) Click Connect the Interface cable & Install the driver/utility from the Initial Setup
menu.
(2) Follow the on-screen instructions, and restart your Macintosh.
(3) Make sure the printer power switch is on.
(4) Connect the USB interface cable to your Macintosh, and then connect it to the printer.
NOTE: Do not connect the USB cable to the keyboard USB Port or a non-powered USB Hub.
(5) Open the Chooser from the Apple menu.
(6) Click the Brother Laser and select HL-5000 series. Close the Chooser.
(7) The setup is now complete.
® ®
4.0 and Windows
95/98/ME users: After your PC has restarted, setup will be complete.
® ®
4.0 and Windows
95/98/ME users: After your PC has restarted, setup will be complete.
Fig.2-11
2000/XP users: The setup is now complete.
2000/XP users: The setup is now complete.
2-11
HL-5030/5040/5050/5070N SERVICE MANUAL