Mp Unit (For Hl-5050/5070N Only) - Brother HL 5030 - B/W Laser Printer Service Manual

3.12

MP Unit (for HL-5050/5070N only)

(1) Disconnect the two connectors.
(2) Remove the MP ground spring.
(3) Remove the two bind B M3x10 and cup S M3x6 Taptite screws.
(4) Remove the MP solenoid holder unit.
MP ground spring
MP solenoid holder unit
Engine PCB
connector
Taptite, bind B
M3x10
(5) Remove the cup S M3x6 Taptite screw, and then open the MP chute ASSY cover.
(6) Remove the paper pick-up roller ASSY from the shaft.
MP chute ASSY cover
Taptite, cup S M3x6
Fig. 4-38
Paper pick-up roller ASSY
Fig. 4-39
4-23
HL-5030/5040/5050/5070N SERVICE MANUAL
MP sensor harness
Taptite, cup S M3x6
Shaft
Hook