Fixing Unit - Brother HL 5030 - B/W Laser Printer Service Manual

3.13

Fixing Unit

(1) Disconnect the heater harness and thermistor harness.
(2) Remove the bind B M4x12 Taptite screw and the shoulder screw, and then remove the
fixing unit.
Shoulder screw
Heater harness
(3) Remove the three cup B M3x10 Taptite screws, and then remove the FU paper guide.
FU paper guide
Fixing unit
Taptite, bind B M4x12
Fixing unit
Pins
Fig. 4-49
Fig. 4-50
4-29
HL-5030/5040/5050/5070N SERVICE MANUAL
Thermistor harness
Pin
Taptite, cup B M3x10