Install The Printer; For All Users - Brother HL 5030 - B/W Laser Printer Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
3.

INSTALL THE PRINTER

You need to implement hardware setup and driver installation to use the printer.
Firstly, identify the Operating System on your computer. (Windows
4.0, Windows
(Parallel, USB or Network) for your computer. Most existing parallel cables support bi-
directional communication, but some might have an incompatible pin assignment or may not
be IEEE 1284-compliant.
The installation programs for the hardware setup and driver installation are contained on the
supplied CD-ROM.
3.1

For All Users

For Windows
(1) Turn on the PC power. Insert the supplied CD-ROM into the CD-ROM drive. The
opening screen will appear automatically. Follow the on-screen instructions.
NOTE:
If the opening screen does not appear; click Start and select Run. Then, enter the CD-drive
letter and type \START.EXE (for example: D:\START.EXE).
(2) Click the Initial Setup icon on the menu screen.
(3) You can view the Initial Setup instructions.
For Macintosh users
(1) Turn on the Macintosh. Insert the CD-ROM into the CD-ROM drive.
(2) Double click the Start Here icon or Start Here OS X icon. Follow the on-screen
instructions.
(3) Click the Initial Setup icon on the menu screen.
(4) You can view the Initial Setup instructions.
®
2000/XP and Macintosh)Then, purchase the appropriate interface cable

users
2-4
®
95/98/Me, Windows NT
®