Brother HL 5030 - B/W Laser Printer Service Manual page 145

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(10) Remove the bearing L from the P/R shaft.
(11) Remove the P/R shaft from the frame.
Bearing L
(12) Remove the idle gear 22.
(13) Remove the middle roller gear.
(14) Remove the bind B M3x10 taptite screw and the conductor bearing.
(15) Remove the 1st F/R shaft from the frame.
Idle gear 22
Middle roller gear
Hook
Conductor bearing
Taptite bind B M3x10
1
2
Fig. 4-84
1st F/R shaft
Fig. 4-85
4-48
P/R shaft
Frame