Print Fonts (For Hl-5040, Hl-5050 And Hl-5070N) - Brother HL 5030 - B/W Laser Printer Service Manual

5.5.4 Print fonts (For HL-5040, HL-5050, and HL-5070N)
You can print a list of the internal fonts using the control panel button or printer driver.
<Using the control panel button>
(1) Turn off the printer.
(2) Make sure that the front cover is closed and the power cord is plugged in.
(3) Hold down the Go button as you turn on the power switch. All the LEDs light up. Keep the Go
button pressed down until all the LEDs except for Toner LED go off. When the Drum, Paper
and Status LEDs go off, release the Go button.
(4) Press and hold the Go button again until the Drum LED comes on.
(5) When the Drum LED comes on, release the Go button. The printer will print a list of the
internal fonts.
<Using the printer driver (For HL-5040, HL-5050 and HL-5070N)>
If you are using Brother's Windows PCL printer driver, you can print a list of the internal fonts by
clicking the Print Fonts button in the Support tab.
HL-5030/5040/5050/5070N SERVICE MANUAL
2-35