Table of Contents
Advertisement
Burners
They can be removed and washed with soapy water only.
They will remain always perfect if cleaned with products used for silverware.
After cleaning or wash, check that burner-caps and burner-heads are dry before plac-
ing them in the respective housings.
Note: To avoid damage to the electric ignition do not use it when the burners
are not in place.
Correct replacement of the burners
It is very important to check that the burner flame distributor F and the cap C has been
correctly positioned (see figs. 17-18) - failure to do so can cause a poor burner flame
and/or damage to the burner and hob.
Check that the electrode S (fig. 17) is always clean to ensure trouble-free sparking.
Check that the probe T (fig. 17) next to each burner is always clean to ensure correct
operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
The burners become very hot during operation.
Keep children away.
C
F
T
S
Fig. 17
Fig. 18
38
Advertisement
Table of Contents
