Power Supply Unit Removal; Figure 3-7. Front Cover Removal; Figure 3-8. Shield Cover Removal - Epson EPL-N1200 Service Manual

Disassembly and Assembly

3.2.2.2 Power Supply Unit Removal

1. Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
from light or place it in a dark area.
Remove one CC (M3 × 6) screw from the control panel then lift the panel forward.
2.
3. Remove two CC (M3x8) screws on the paper guide case.
4. 4. Loosen one CC (M3x8) screw which secures the front cover.
5. Remove the paper guide case and the front cover.
6. Remove one CP(O) (M3x6) screw on the power supply board shield cover and take the PS
unit shield cover away.
7. Remove two CP(O) (M3x8) screws which secure the power supply unit frame and release two
fooks from the bottom frame. Then remove the power supply unit frame by pulling it forward.
8. Remove all connectors on the power supply board, CN1, CN2, CN3, CN4, CN5, CN6, blue
socket and white socket cables on the power supply board.
9. Remove four CC (M3x6) screws securing the power supply board and its frame.
3-8

Figure 3-7. Front Cover Removal

Figure 3-8. Shield Cover Removal

EPL-N1200 Service Manual
Rev. A