EPL-N1200 Service Manual
Figure 1-7 shows the timing chart of termination.
Note 1: The signal is HIGH when HB DNA.
The signal is LOW when HB DA.
Note 2: The signal is set to HIGH, if extension request value was 04h.
Note 3: Idle = LOW
Figure 1-8 shows the timing chart for an interrupt.
Note :
The signal is set to HIGH, if extension request value was 04h.
Rev. A
Figure 1-7. Termination Timing Chart
Figure 1-8. Interrupt Timing Chart
General Description
1-17