Epson EPL-N1200 Service Manual page 34

EPL-N1200 Service Manual
Buttons
o On Line
o Manual Feed
(On Line + ALT)
o Item
o Page Size
(Item+ ALT)
o Paper Source
(Menu+ ALT)
o ALT
↑
o
↓ (↑ + ALT)
o
o Enter
o Form Feed
o Continue
o SelecType
o Menu
o Value
o Enter
o RESET
(Continue + ALT)
Rev. A
Switches the printer between on-line and off-line modes. While in
SelecType mode, this button exits SelecType mode.
Enters directly (a short cut) to manual feed; this setting is the same
as the manual setting in the PRINTING Menu of SelecType.
Enters SelecType mode.
Changes the item in SelecType mode.
Enters directly (a short cut) to the paper size setting for the standard
and optional paper tray in Printing Menu of SelecType.
Enters directly (short cut) to the paper tray select setting in
Config Menu of SelecType.
Modifies functions of other buttons.
Changes to the next SelecType option.
Changes to the previous SelecType option.
Sets the current option in SelecType.
When the printer is off line and the Form Feed light is lit, pressing
this button prints data in the printer's memory.
Pressing this button when the Continue light is flashing clears an
error.
Selects one of three modes, OneTouch menu 1, OneTouch menu 2,
or SelecType mode.
Selects one of three menus, Paper Source, RITech, or SelecType.
Selects one of three menus, Manual Feed, MP Tray Size, or
selects item option in SelecType.
Selects one of three menus, Orientation, Toner Save Mode, or
defines setting value or executes an operation in SelecType.
Enter to reset operation; LCD displays " Reset" , printing stops, and
the input buffer of current interface is cleared.
If the Continue + ALT buttons aredepressed continuously after
" Reset" displays, the message displayed on the LCD changes to
" Reset ALL" (after about 5 seconds), and the printer enters to
Warming Up" operation; printer clears all RAM.
General Description
1-23