EPL-N1200 Service Manual
3.2.2.7 Paper Take-up Solenoid Removal
1.
Open the top cover. Remove the imaging cartridge. Cover the imaging cartridge to protect it
from light or place it in a dark area.
2.
Remove the toner end sensor. (Refer to Section 3.2.2.6.)
3.
Remove the roller cover.
4.
Remove the bracket which mounted the toner empty sensor.
5.
Disconnect the cable for the paper take-up solenoid from the base unit.
Remove one CC (M3 × 6) screw from the paper take-up solenoid and remove the paper
6.
take-up solenoid.
Figure 3-18. Paper Take-up Solenoid Removal
Rev. A
Figure 3-17. Bracket Removal
Disassembly and Assembly
3-15