Disassembly And Assembly; Main Controller Board (C205 Main Board) Removal - Epson EPL-N1200 Service Manual

Disassembly and Assembly

3.2 DISASSEMBLY AND ASSEMBLY
This section describes and illustrates the procedures for removing and disassembling the
components of the EPL-N1200. Cleaning is described in Chapter 6. The assembly procedures are
not described, except for special notes where necessary, because assembly can be accomplished
by performing disassembly in reverse.
3.2.1 Main Controller Section Removal
The control section is comprised of the main controller board (C205 MAIN board) and the control
panel unit.

3.2.1.1 Main Controller Board (C205 MAIN Board) Removal

Before you remove the main controller board, make sure that you remove any
optional cards or cartridges. Otherwise, you may damage the cartridge or card
connectors on the board as well as the cartridge or card itself.
1. Turn the printer so that its back side faces you.
Remove the four thumbscrews (M3 × 14).
2.
3. 3. Pull the plastic tabs to release the main controller board.
5. Grasp the board with both hands and pull it out of its slot.
Figure 3-1. Main Controller Board Removal (1)
Figure 3-2. Main Controller Board Removal (2)
3-4
CAUTION
EPL-N1200 Service Manual
Rev. A