Changing Power Modes - Gateway C-140S Reference Manual

Changing power modes

You can use the following power modes to lengthen the life
of your convertible notebook's batteries:
•
•
•
Using power saving modes
Always save your work before using Sleep mode. In Sleep
mode, your convertible notebook reduces or turns off the
power to most devices except memory. However, the
information in memory is not saved to the hard drive. If power
is interrupted, the information is lost.
When in Hibernate mode, your convertible notebook saves all
memory information to the hard drive, then turns the power
completely off.
74
CHAPTER 5: Managing Power
Sleep - while your convertible notebook is in Sleep
mode, it switches to a low power state where devices,
such as the display and drives, turn off.
Hibernate - (also called save to disk) writes all current
memory (RAM) information to the hard drive, then turns
your convertible notebook completely off. The next
time you turn on your convertible notebook, it reads the
memory information from the hard drive and opens the
programs and documents that were open when you
activated Hibernate mode.
Hybrid Sleep - while your convertible notebook is in
Hybrid Sleep mode, it switches to a low power state
where devices, such as the display and drives, turn off
similar to Sleep mode. The convertible notebook also
writes all current memory (RAM) information to the
hard drive similar to Hibernate mode. If your convertible
notebook experiences a power outage while in Hybrid
Sleep mode, the convertible notebook reads the
memory information from the hard drive and opens the
programs and documents that were open when you
activated Hybrid Sleep mode. If the convertible
notebook does not experience a power outage while in
Hybrid Sleep mode, it restarts using the information in
current memory, thus reducing startup time. You must
turn on Hybrid Sleep mode to use it. For more
information, see
page 77.
"Changing advanced settings" on