Recovering Your System Using The Windows Dvd - Gateway C-140S Reference Manual

Recovering your system using the
Windows DVD
If you install a new hard drive or completely re-format your
original hard drive, you must recover your system using the
Windows Vista operating system DVD. (Your convertible
notebook must have a DVD-compatible drive to use the
Windows Vista DVD.) You also need to recover your
convertible notebook's pre-installed software and device
drivers.
To completely re-install Windows:
1
2
3
4
5
www.gateway.com
If you can still run Windows, back up your personal files,
and create a set of software and driver recovery discs
(if you have not already done so). For instructions, see
"To create discs for recovering pre-installed software
and drivers:" on page
Insert the Windows DVD into your convertible
notebook's DVD-capable drive, then turn on or restart
your convertible notebook.
When the prompt "Press any key to boot from CD
or DVD" appears, press any key on your keyboard. A list
of valid boot devices appears.
Press the arrow keys to select the drive containing the
Windows DVD, then press E
on-screen instructions.
After Windows is completely re-installed, use the
software and driver recovery discs you created to
recover your convertible notebook's pre-installed
software and device drivers. For instructions, see
"Recovering pre-installed software and drivers using
recovery discs" on page
93.
and follow the
NTER
96.
103