Display - Gateway C-140S Reference Manual

You see a "Non-system disk," "NTLDR is missing," or "Disk
error" error message
•
•
The diskette drive status indicator is lit continuously
•

Display

The screen is too dark
•
The screen resolution is not correct
•
The text on the display is dim or difficult to read
•
•
•
The display has pixels that are always dark or too bright
This condition is normal and inherent in the TFT technology
used in active-matrix LCD screens. Gateway's inspection
standards keep these to a minimum. If you feel these pixels
are unacceptably numerous or dense on your display, contact
Gateway Customer Care to identify whether a repair or
replacement is justified based on the number of pixels
affected.
www.gateway.com
Eject the diskette from the diskette drive, then press
E .
NTER
Make sure that the diskette you are using is
IBM-compatible.
Remove the diskette from the drive. If the indicator
stays on, try restarting your convertible notebook.
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
Change the screen resolution from the Display Settings
dialog box. For instructions on changing the screen
resolution, see "Changing the color depth and screen
resolution" in your online User Guide.
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see
Change the display settings. For instructions on
changing the display settings, see "Changing screen
settings" in your online User Guide.
Move your convertible notebook away from sources of
electrical interference, such as televisions, unshielded
speakers, microwaves, fluorescent lights, and metal
beams or shelves.
"Adjusting brightness" on page
"Adjusting brightness" on page
44.
44.
119